Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Spring Repair for Austin Homeowners
Garage door spring repair in Austin typically runs $180 – $340 and most jobs are finished the same day. When a spring snaps, the door becomes dead weight and won’t open without a fight. You’ll hear it before you see it: a loud bang from the garage that sounds like a firecracker going off, then a door that refuses to budge. That’s the torsion spring, the horizontal coil mounted above your door that does the heavy lifting every single time you press the opener. At Marlow Garage Door Repair Austin, we’ve handled thousands of spring failures across the city since 2002, and we answer the phone with a live person 24 hours a day. For fast service, call our Garage Door Spring Repair in Austin team. Call (361) 320-8872 and Jaylen Ross or a member of our Austin team will get you a written price before any work begins.
- Typical cost: $180 – $340, quoted and locked before we start
- Same-day service: Most Austin spring replacements are done in one visit
- 365-Day Done Right Promise: If the repair fails, we come back free
- No surprises: Written price, live tech tracking, digital invoice
Garage Door Spring Replacement
Garage Door Spring Replacement is what we do when a spring has snapped, stretched, or simply worn past its rated cycle life. Every spring is engineered for a specific number of open-close cycles, usually 10,000 for standard residential doors, and once that limit passes in an Austin climate where doors open twice a day on average, replacement is the only fix. At Marlow Garage Door Repair Austin, we replace both springs on a double-spring system even when only one has failed because they wear at the same rate. The job usually runs $180 – $340 depending on spring type, wire gauge, and door weight. You’ll see the exact number in writing before we turn a wrench.
When Replacement Beats Repair
If a spring has snapped, there’s no repairing it. Springs cannot be welded, spliced, or patched safely. If your door is 8 to 12 years old and one spring has failed, replacing both is the only option that keeps the other from failing weeks later and costing you a second service call.
The Importance of Correct Sizing
A spring that’s too weak leaves your opener doing all the work and burns it out. Too strong and the door jerks upward and slams at the top. We measure door height, weight, and track radius before ordering, so the replacement spring is matched to your specific setup, not guessed at.
Styles & brands we work with
Garage Door Torsion Spring Replacement
Garage Door Torsion Spring Replacement targets the coil that sits on a metal shaft directly above the closed door. Torsion springs do the lifting by twisting and untwisting, generating enormous torque, and they last longer than extension springs because they’re not exposed to as much friction. When one breaks in an Austin home, the door typically won’t move at all. Marlow Garage Door Repair Austin handles torsion spring replacement on every major door brand, and most jobs fall between $180 – $340, with the final number locked before work begins. Torsion springs carry thousands of pounds of stored tension, so we recommend a trained technician rather than attempting it yourself.
Why We Replace Both Springs
When a two-spring torsion system loses one spring, the other has already lived through the exact same number of cycles. That means it’s about to fail too, usually within a few weeks or months. Replacing both at once costs less in labor than a second emergency call later. We stock common torsion spring sizes on our Austin service trucks, so we can often complete a double replacement in one visit the same day you call. We also carry parts for Garage Door Spring Repair in Pflugerville.
The Dangers of Improper Winding
Winding a torsion spring by hand without the right bars is one of the most dangerous DIY repairs in any home. The stored energy can release suddenly and cause serious injury. Our trained technicians wind springs to the correct number of turns and use a torque meter to verify, which is why every job is covered by the 365-Day Done Right Promise.
Broken Garage Door Spring
A Broken Garage Door Spring is the most common cause of a garage door that suddenly stops working. You’ll usually hear a loud snap, then find a visible gap in the coil or a door that only rises a few inches before stalling. In Austin, the heat accelerates spring fatigue, especially in uninsulated garages that bake all afternoon. When you call Marlow Garage Door Repair Austin, we arrive with the right spring for your door’s weight and height, and the repair costs $180 – $340, written up front and agreed before any work starts. Don’t keep pressing the opener on a broken spring; you’ll strain the motor and strip the gears.
What Happens When You Ignore It
A broken spring means your door’s entire weight now sits on the opener and the cables. The opener motor isn’t built for that load and will overheat or burn out, turning a $250 spring job into a $500 opener replacement too. In neighborhoods like Wells Branch and Brushy Creek, where people park in the garage daily, a door stuck shut also means a car trapped inside and a morning commute gone.
How We Inspect the Whole Door
Every broken spring call includes a full door inspection: cables, rollers, hinges, and track alignment. Sometimes a snapped spring is a symptom, not the root cause. We check for a door that’s out of balance, cables that are fraying, or a track that’s drifted, and we show you photos before recommending anything. You decide what gets fixed, with a written price for each item.
Garage Door Extension Spring
A Garage Door Extension Spring is the older-style spring you’ll see running horizontally along the upper track on each side of the door. These springs stretch and contract rather than twist, and they require a safety cable running through the center so that when they snap, the spring doesn’t fly across the garage. Older Austin homes in places like Hyde Park and Rosedale often have extension spring systems, and when one breaks, the door goes crooked and jams. Marlow Garage Door Repair Austin replaces extension springs in pairs, and the cost typically lands between $180 – $340, with the price agreed before we start. We also check that your safety cables are present and properly anchored.
Why Safety Cables Matter
A snapping extension spring travels fast enough to dent a car door or injure someone. A safety cable threaded through the spring catches the broken pieces and keeps them from becoming projectiles. Many older Austin garages are missing these cables entirely. We include a safety cable inspection with every extension spring replacement, and we’ll install them if they’re absent.
Upgrading to a Torsion System
If you’re tired of extension springs breaking every seven or eight years, we can convert your door to a torsion system. It’s a bigger job, but torsion springs last longer, balance the door more evenly, and give you a smoother opener performance. We’ll quote the conversion separately from the spring replacement so you can compare the numbers before deciding.
Garage Door Spring Installation
Garage Door Spring Installation covers any time a new door needs springs or a full spring system is being rebuilt. New doors sometimes ship with springs rated for a different door weight than the one you actually own, and we fix that mismatch during installation. The job runs $180 – $340 for standard residential springs, and every new spring we install in an Austin home is wound to the manufacturer’s spec and tested through a full open-close cycle before we call it done. You get a written price before we start, and the 365-Day Done Right Promise covers every part we install.
Why a Pro Install Matters
Springs that are wound a few turns short leave your door heavy and hard to lift. A few turns too many and the door shoots up and yanks the opener chain. There’s no way to fix the balance without knowing the exact cycle count and spring rate. Our techs train on eight major brands, including LiftMaster, Chamberlain, and Genie, so the spring matches the rest of your hardware.
What a New Spring Should Cost
Any quote for spring installation should include the spring itself, winding, balance testing, and often new bearing plates or end cones if yours are worn. If a quote is dramatically below $180, you’re likely getting a spring rated for fewer cycles or a one-spring replacement on a two-spring door. We show you the spring’s cycle rating and explain what it means for how long it will last in your garage, before you pay a dime.
Garage Door Spring Adjustment
Garage Door Spring Adjustment is the smaller job we do when your door is still opening but it’s off balance. A door that creeps down after you lift it halfway or an opener that sounds like it’s straining are classic signs the spring tension is wrong. Adjustment just means adding or removing turns on the existing spring, and it typically costs less than a full replacement, often at the lower end of our $180 – $340 range. Marlow Garage Door Repair Austin performs adjustments on doors all over Austin, from Shady Hollow to Hornsby Bend, and we always test the door’s balance with the opener disengaged so we can feel the true weight. Adjusting a live spring is dangerous work; we use proper winding bars and we never rush it.
Signs Your Tension Is Off
A properly balanced door stays put when you release it halfway up. If it drops, the spring is under-wound. If it rises on its own, it’s over-wound. Both conditions strain your opener and shorten the life of a new spring, and they’re quick to correct when caught early.
Why We Include a Balance Test
Every visit includes a balance test, whether we’re installing a new spring or adjusting an existing one. We pull the emergency release, move the door by hand, and watch what it does. It takes two minutes and tells us everything about whether the spring is dialed in. If it’s not, we fix the tension before we leave, not on a return visit.
Brands We Service
Our Austin technicians train specifically on LiftMaster and Chamberlain openers, which are the two most common systems we see in neighborhoods like Jollyville and Lago Vista. We know how those openers interact with the springs above them, and we stock OEM-compatible parts for both. When your LiftMaster is fighting a broken spring, we can often replace the spring and re-program the opener’s travel limits in the same visit so everything works together smoothly.
We also service Craftsman doors and openers frequently, especially in older Austin subdivisions where Craftsman units from the 2000s are still running. A Craftsman opener with a worn gear will grind and chatter even after a new spring is installed, which is why we inspect the whole system instead of just the part you called about. Whether you have a Craftsman, Raynor, LiftMaster, Chamberlain, Genie, Clopay, Amarr, or Wayne Dalton door, our techs can service it and carry the right parts on the truck.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- You heard a loud bang from the garage. That’s almost always a torsion spring snapping. The door won’t lift properly, and forcing it will burn out the opener motor or snap a cable. Stop using the opener and call us for a same-day inspection.
- The door only opens a few inches and stops. When a spring breaks, the opener senses the extra weight and shuts down to protect itself. You might see the motor strain and hear a grinding sound. This isn’t an opener problem; it’s a spring problem.
- The door looks uneven, with a visible gap in the spring coil. A broken torsion spring often leaves a two-inch gap where the coil separated. On extension spring doors, the spring will be dangling on one side. Either way, the door is unsupported and unsafe to lift manually.
- The door slams down when you pull the emergency release. A properly sprung door should be easy to lift and hold in place. If the door drops hard, the spring is either broken or badly under-tensioned. Don’t try to lift it yourself; a falling door can injure you.
- Your opener is working harder than it used to. Listen for a humming or grinding sound when the door moves. If the spring is near the end of its life, the opener is compensating for the lost lift, and that kills opener gears quickly. A spring inspection now is cheaper than a spring and an opener later.
Our Process, Step by Step
- 1
You call or book online. A live person answers at (361) 320-8872, 24 hours a day. You’ll tell us what’s happening with your door, and we’ll give you a straight answer about what it likely is and what it might cost, plus a live tech tracking link the moment your appointment is set.
- 2
Your tech arrives in a marked Marlow vehicle. You’ll see your technician’s name and background-checked profile before they pull into the driveway. They’ll inspect the door, measure the spring, and photo-document what they find.
- 3
You get a written price, not a verbal guess. Before any work begins, you’ll receive a written quote that includes the spring, the labor, and any parts. The number on that quote is the number you’ll pay, no matter what. No exceptions, ever.
- 4
The repair happens, with a balance test at the end. We install the spring, set the correct tension, and run the door through a full open-close cycle. We’ll also check the cables, rollers, and opener settings, and show you before-and-after photos.
- 5
You pay from a digital invoice and get the 365-Day Done Right Promise in writing. The invoice comes straight to your phone. If the repair fails any time in the next 365 days for something we touched, we come back and fix it free. It’s written on every invoice.
How Much Does Garage Door Spring Repair Cost in Austin?
A typical garage door spring repair in Austin runs $180 – $340, depending mainly on whether you have a single or double spring system, the spring’s cycle rating, and the door’s weight. A single torsion spring on a standard single-car door sits at the lower end of that range. A two-spring torsion setup on a 16-foot double door, or a conversion from extension springs to a torsion system, lands at the higher end. In neighborhoods like Lost Creek and Westlake, where many homes have heavy, insulated, custom doors, the spring needs to be stronger and the price reflects that.
What affects the price most is spring type and cycle rating. A basic 10,000-cycle spring costs less than a 20,000-cycle-rated spring, which lasts roughly twice as long. You’ll also see a difference based on location: a service call to Garage Door Spring Repair - Manor or Buda carries the same spring price, but dispatch distance can shift the total slightly. The best way to avoid overpaying is to get a written quote with line items for the spring, the labor, and any additional parts like bearing plates or safety cables. A free estimate should include a full door inspection, a balance test, and a written price for everything we recommend, with no obligation to proceed. Call (361) 320-8872 for an exact quote on your door.
Our Service Area Near Austin
We serve all of Austin proper plus the surrounding communities where garage doors work hard. You’ll find our trucks in Leander, Kyle, Buda, Jollyville, Lago Vista, Brushy Creek, Shady Hollow, Lost Creek, Hornsby Bend, Wells Branch, and Manor. Most of these calls are within 30 to 45 minutes of our dispatch point, and since we stock common springs on every truck, most jobs are wrapped up in one visit. If you’re not sure whether we cover your street, call and ask; a real person will tell you straight.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Spring Repair in Austin
Garage door spring repair means diagnosing, adjusting, or replacing the springs that counterbalance your door. In most Austin homes, this means replacing a broken torsion spring above the door or swapping out old extension springs along the tracks. The repair restores the door’s balance so the opener works properly and the door can be lifted safely by hand.
Most spring replacements take 45 to 90 minutes once the tech is on site. A single torsion spring on a standard door is usually done in under an hour. If we’re converting from extension springs to a torsion system, expect closer to two hours. Same-day appointments are available for most Austin ZIP codes.
Most jobs fall between $180 and $340, with the exact price depending on your door’s weight, spring type, and whether it’s a single or double spring system. You’ll see the exact number in writing before any work starts, and that price won’t change. Call (361) 320-8872 for a free estimate on your specific door.
Yes. Our techs train on eight major brands including LiftMaster and Chamberlain, which we service more than any other opener brands in Austin. We also work on Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers. The tech who arrives will know your brand before they ring the bell.
In most cases, yes. We run same-day service across Austin and the surrounding areas, and we answer the phone live 24/7. A broken spring leaves your door unusable, so we prioritize these calls. Call (361) 320-8872 and we’ll give you a straight answer on arrival time, with live tracking so you know exactly when we’re coming.
Every spring repair carries our 365-Day Done Right Promise. If the spring fails or the door goes out of balance within a year due to something we did, we come back and fix it free. The warranty is in writing on your invoice, not buried in fine print, and it covers both parts and labor.
Clear the area around the garage door and make sure the door to the garage is accessible. If you can, park your car outside so the tech can work without maneuvering around it. Other than that, you don’t need to do anything. We carry all the springs, parts, and tools we need on the truck.
Schedule Your Garage Door Spring Repair Service in Austin Today
A broken spring won’t fix itself, and every time you press that opener you’re making the damage worse. Call (361) 320-8872 now for a free, no-obligation estimate. We’ll give you a live arrival window, a written price before any work starts, and the 365-Day Done Right Promise on every repair. Our home team is ready, and our Garage Door Spring Repair in Austin service area covers the whole metro. One call and your door is on its way back up.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Austin, serving Austin since 2002.