A Marlow company - serving Austin, TX

Spring Repair in Austin, TX

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as$59/month*On approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Get your free estimate
Explore

Styles & brands we work with

Raised-panel steel
Raised-panel steel
Carriage house
Carriage house
Modern flush
Modern flush
Full-view glass
Full-view glass
LiftMaster openers
LiftMaster openers
Chamberlain openers
Chamberlain openers
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Spring Repair in Austin, TX

Garage door spring repair in Austin typically costs $150 – $290 for a standard torsion spring replacement, and most jobs are completed the same day you call. If your door won’t lift, makes a loud bang, or hangs crooked, the spring or a cable is almost always the culprit. At Marlow Garage Door Repair Austin, we give you a written price before any wrench turns, and every spring we install is covered by our 365-Day Done Right Promise. Call us at (361) 320-8872 and you’ll talk to a live person, not a recording, 24 hours a day.

Springs are the muscle of your garage door system. The torsion spring – the horizontal coil mounted above your door opening – carries the door’s entire weight through every open-and-close cycle. When it snaps, your door becomes dead weight, often all 150 to 250 pounds of it. We’re trained on LiftMaster, Chamberlain, and Raynor systems, and we’ve been fixing spring failures across Austin neighborhoods like Hyde Park, Mueller, Cherrywood, and Allandale since 2002. This is a core part of our Garage Door Repair service, and it’s the repair we do most often.

When You Need Spring Repair

Most homeowners don’t think about their springs until the door won’t move. Here’s what a failing or snapped spring looks like in Austin, where our heat and humidity cycles put real stress on tempered steel:

  • Your door won’t open more than a few inches. The opener is trying, but without spring tension it can’t lift the weight. In neighborhoods like Travis Heights and Barton Hills, we see this frequently on older doors that have never had a spring replaced.
  • You heard a bang from the garage. That’s the sound of a torsion spring snapping under load. It’s loud, often mistaken for something hitting the door, and it means the spring has fully failed.
  • The door feels unusually heavy when you lift it manually. Pull the red release cord and try raising the door by hand. If it takes serious effort, your springs have lost tension and are near the end of their life.
  • The door hangs crooked or sags on one side. This usually points to a broken extension spring on one side, common on older Craftsman setups we see in Crestview and Rosedale.
  • You see a visible gap in the spring coil. A torsion spring is one continuous coil. If there’s a break in the middle, you’ll see a two-inch gap where the coil separated.
  • Your door opened fine yesterday and won’t budge today. Springs don’t fade gradually in Austin’s climate; they fail suddenly after 10,000 to 20,000 cycles, which for most Austin homes means every 7 to 10 years.

A quick note on safety: garage door springs are under extreme tension, and a torsion spring that’s mid-failure can release enough force to cause serious injury. If you see a gap in the coil or the door won’t hold position, don’t try to tighten, adjust, or remove anything. That’s a job for a trained technician with the right winding bars and a clear understanding of how much stored energy is in that steel. We’d rather walk you through what we’re seeing over the phone than have you take a risk in the name of saving a service call.

Our Spring Repair Process

Here’s exactly what happens when you call Marlow for spring repair in Austin:

  1. You call or book online. A live person answers at (361) 320-8872, any hour, any day. Tell us what the door is doing. We’ll give you a straight answer about whether it sounds like a spring, a cable, or something else.
  2. You get a live arrival window you can track. Once we dispatch a technician, you’ll see their location and ETA from your phone. No four-hour windows, no “sometime between 8 and 3.” That’s The Relay Visibility Guarantee, and it’s how every job runs.
  3. The technician inspects the full door system. We measure the existing spring’s wire size, inner diameter, and length, then check the cables, rollers, and opener to make sure the new spring is matched to the actual door weight, not a guess.
  4. You get a written price before any work starts. We tell you the exact number, in writing, with the spring type and cycle rating spelled out. The invoice you pay at the end will match that number to the penny.
  5. We install the new spring and balance the door. Most spring replacements take 45 to 90 minutes. We wind the new spring, rebalance the door, test the full cycle, and photograph the finished work for your records.
  6. You pay from a link and get a 365-day guarantee in writing. Your invoice is digital, your guarantee is real, and if that spring fails within a year, we’re back out to make it right at no charge. That’s the 365-Day Done Right Promise.

Spring Repair Pricing in Austin

Spring replacement in Austin typically runs $150 – $290 per spring, depending on spring type, cycle rating, and door size. You’ll see the exact number before we start, not after. Here’s what drives the range:

  • Single vs. double spring. Most double-wide doors use a two-spring system. If one spring fails, we often recommend replacing both to keep the door balanced. Expect $150 – $250 per spring for a standard torsion setup.
  • Cycle rating. A 10,000-cycle spring is the industry baseline and costs less upfront. A 25,000-cycle spring, which most Austin homeowners choose, runs about 20 – 30% more and lasts roughly three times as long in day-to-day use. For a garage that opens four times a day, that’s the difference between seven years and seventeen-plus years.
  • Spring type. Torsion springs (above the door on a shaft) are the modern standard and what we install on LiftMaster, Chamberlain, Raynor, and Craftsman doors throughout Austin. Extension springs (mounted along the horizontal tracks) cost slightly less but are less common on newer systems.
  • Labor and warranty. Our labor is included in the quote, and every spring carries the 365-Day Done Right Promise. You’re not paying a material price plus an unknown markup; you’re paying one number, agreed to in writing, that covers everything.

If you’re comparing prices, be wary of any quote under $100 for a spring replacement in Austin. That’s typically a bare-minimum spring with a 90-day parts-only warranty, and you’ll likely pay for another service call when it fails. A quality torsion spring installed by a certified technician in Austin should land in that $150 – $290 window. Call (361) 320-8872 for an exact quote. Estimates are free, and the number we give you over the phone is the number you’ll see on the written quote before work begins.

FAQs – Spring Repair

How long does a garage door spring last in Austin?

In Austin’s climate, most torsion springs last 7 to 10 years – that’s about 10,000 to 20,000 cycles, with a cycle being one full open-and-close. Austin’s heat and humidity fluctuations accelerate metal fatigue compared to milder climates, so if your house was built before 2017 and still has the original springs, you’re likely overdue. We install 25,000-cycle springs for most customers who want the longest possible service life. Call (361) 320-8872 and we’ll tell you the cycle rating on your current spring’s cone if you can read it to us, or we’ll assess it on-site for free.

Can you replace a garage door spring the same day?

Yes, and most spring replacements in Austin are same-day jobs for us. We carry a full range of spring sizes, wire gauges, and cycle ratings on our trucks, so we don’t have to leave and come back with parts. Most homes in Mueller, Zilker, and Brentwood get a spring replaced within a few hours of the first call. Book online or call (361) 320-8872 and you’ll have a live arrival window before you hang up.

Is it cheaper to repair or replace the garage door spring?

It’s almost always cheaper to repair. A spring replacement at $150 – $290 compares against $1,200 – $3,500 for a full new door, and a broken spring rarely means the door itself is done. We’ll only recommend replacing the whole door if the panels, tracks, or opener have degenerated to the point where a new spring would be wasted money. In our 20-plus years serving Austin, that’s maybe one in ten calls.

What brands of garage door springs do you work with?

We service and replace springs for all major garage door brands, including LiftMaster, Chamberlain, Raynor, and Craftsman systems across Austin. The brand matters less than the spring’s specs – wire size, inner diameter, length, and cycle rating – which we match to your door’s exact weight and size. Your written quote will state the spring specs and cycle rating, so you know exactly what you’re paying for.

Do you offer a warranty on spring repair?

Yes – every spring we install is covered by our 365-Day Done Right Promise. If the spring fails within one year of installation, we come back and make it right at no charge. It’s written on your invoice, not buried in fine print, and it applies to parts and labor. That’s the same guarantee we’ve stood behind since opening in 2002.

Spring Repair Across Austin

We work in every corner of Austin, from the single-family ranches of Brentwood to the new builds in Mueller and the older door systems in Hyde Park. Austin’s garage door mix is unusually varied – we see everything from 1980s Craftsman extension-spring setups to brand-new Chamberlain belt-drive doors with twin torsion springs – and we carry parts for all of it. If your door was originally installed by a builder, a big-box store, or a previous homeowner, we can identify the spring type and get it replaced correctly the first time.

Ready to get your door moving again? Call (361) 320-8872 for a free estimate, or book your spring repair online and track your technician to your driveway. You’ll get a written price before any work starts, and your spring will carry the full 365-Day Done Right Promise. No runaround, no changing numbers, no four-hour windows – just a door that opens when you need it.

Written by Jaylen Ross, Owner at Marlow Garage Door Repair Austin, serving Austin since 2002.

Need Garage Door help in Austin? Licensed & insured · same-day response · free estimates
Call (361) 320-8872
Local Service Coverage

Request a Free Estimate in Austin

Tell us what you need - Marlow Garage Door Repair Austin responds fast. No obligation.

By reaching out through this form, you confirm you have read our Privacy Policy and authorize us to contact you by telephone, text message, or email about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch